Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Liquid chromatography-diode array detection-electrospray ionisation mass spectrometry/nuclear magnetic resonance analyses of the anti-hyperglycemic flavonoid extract of Genista tenera. Structure elucidation of a flavonoid-C-glycoside

The anti-hyperglycemic flavonoid extract obtained from Genista tenera was first studied by liquid chromatography (LC)-diode array detection (DAD) which showed the presence of two major compounds. One of them was identified as genistein-7-O-glucoside. Luteolin-7-O-glucoside was detected as a minor constituent, while luteolin-7,3'-di-O-glucoside and rutin were found in trace amounts. LC-DAD-ESI-MS and NMR were used to confirm the structure of these compounds and allowed the elucidation of the structure of the unknown major compound, which is the flavonoid 5,7,4'-trihydroxyisoflavone-8-C-glucoside.     

Chemical behavior of the biradicaloid (HO...ONO) singlet states of peroxynitrous acid. The oxidation of hydrocarbons, sulfides, and selenides

Various high levels of theory have been applied to the characterization of two higher lying biradicaloid metastable singlet states of peroxynitrous acid. A singlet minimum (cis-2) was located that had an elongated O-O distance (2.17 A) and was only 12.2 kcal/mol [UB3LYP/6-311+G(3df,2p)+ZPVE] higher in energy than its ground-state precursor. A trans-metastable singlet (trans-2) was 10.9 kcal/mol higher in energy than ground-state HO-ONO. CASSCF(12,10)/6-311+G(d,p) calculations predict the optimized geometries of these cis- and trans-metastable singlets to be close to those obtained with DFT. Optimization of cis- and trans-2 within the COSMO solvent model suggests that both exist as energy minima in polar media. Both cis- and trans-2 exist as hydrogen bonded complexes with several water molecules. These collective data suggest that solvated forms of cis-2.3H(2)O and trans-2.3H(2)O represent the elusive higher lying biradicaloid minima that were recently (J. Am. Chem. Soc. 2003, 125, 16204) advocated as the metastable forms of peroxynitrous acid (HOONO). The involvement of metastable trans-2 in the gas phase oxidation of methane and isobutane is firmly established to take place on the unrestricted [UB3LYP/6-311+G(d,p)] potential energy surface (PES) with classical activations barriers for the hydrogen abstraction step that are 15.7 and 5.9 kcal/mol lower than the corresponding activation energies for producing products methanol and tert-butyl alcohol formed on the restricted PES. The oxidation of dimethyl sulfide and dimethyl selenide, two-electron oxidations, proceeds by an S(N)2-like attack of the heteroatom lone pair on the O-O bond of ground-state peroxynitrous acid. No involvement of metastable forms of HO-ONO was discernible.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

A mew method of synthesis of 1,2,3,4-telrahydro-5H-5-oxo-1,4-benzodiazepines

A new one-step facile method for the synthesis of 1,12,3,4-tetrahydro5H-5-oxo-1,4-benzo-diuzepines is described. The method involves the addition of methyl anlhranilates to elhyl-enimine followed by intramolecular cyclizalion of the resulting intermediate compounds. Another attempted method starting from β-anilinoethylisocyanales is also described.     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.     

Optimization of solid-phase clean-up prior to liquid chromatographic analysis of ochratoxin A in roasted coffee

An extraction and clean-up method for ochratoxin A (OA) in roasted coffee has been developed and the HPLC method optimized. An interfering compound with a similar retention time as OA was adsorbed by the aminopropyl (NH2) material at < or = 5% NaHCO3. Residual OA on the column was recovered by washing with the extraction solution followed with methanol. Fractions were mixed together for further clean-up with Ochratest immunoaffinity columns (IACs). Analysis by HPLC resulted in a well resolved OA peak and reduction in matrix interferences. Recoveries ranged from 72 to 84% and the detection limit was 1 ng/g.     

Reaction products of W(CO)(6) with formamidines; electronic structure of a W(2)(mu-CO)(2) core with unsymmetric bridging carbonyls

Reactions of W(CO)(6) with formamidines contrast with those of Mo(CO)(6) and Cr(CO)(6) in that the former do not yield quadruply bonded dimetal species. From the reaction of W(CO)(6) with HDAniF (HDAniF = N,N'-di-p-anisylformamidine), several new ditungsten carbonyl compounds (W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(2) (1), W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(eta(2)-CH(2)DAniF) (2), and W(2)(mu-CO)(mu-CNC(6)H(4)OCH(3))(mu-DAniF)(2)(eta(2)-DAniF)(2) (3)) have been isolated and fully characterized. In 2, CH(2)DAniF represents a DAniF ligand in which a methylene group has been added to one of the nitrogen atoms. This ligand binds to the tungsten atom using a nitrogen and a carbon atom. Compound 1 has a tungsten-tungsten bond distance of 2.476(1) A and a planar W(2)(mu-CO)(2) core structure which has C(2)(h)() symmetry with short and long W-C bond distances (1.99(1) and 2.28(1) A, respectively). DFT calculations on a model of 1 indicate that (a) the C(2)(h)() instead of D(2)(h)() symmetry of the ditungsten core may be attributed to W --> CO pi back-bonding interactions and (b) the bond between the tungsten atoms may be formulated as a double bond. The new tetragonal paddlewheel compound W(2)(DAniF)(4) (4) and the edge-sharing bioctahedron W(2)(mu-O)(mu-NC(6)H(3)Cl(2))(mu-D(Cl)PhF)(2)(eta(2)-D(Cl)PhF)(2) (5) (D(Cl)PhF = N,N'-di-(3,5-dichlorophenyl)formamidinate) have also been prepared.